11/24/2023 0 Comments Clean coin optics igt slot machinemake sure it is plugged in, try the same test as above and see if anything changes. Now follow the plug that feeds that sub assembly, usually to the right of the bracket that holds the CC-16. If nothing changes then try the next and repeat, if all is solid the connector is good. NOW, repeat the test (turn reset until you get to the 10_1) now wiggle the 10 pin connector going to the optic board, observe the display. If all these conditions are met then the optics are doing what they should be doing. turn the reset key once more, 12_1 in display. turn the reset switch one time, display should be 11_1, now press the tiny white button on the optics board, display should toggle to 11_0 everytime the switch is pushed. open the door, find the white test button (next to or on the rear of the power switch module) push the button until you see a 10_1 in the winners paid window. Ok, found my notes on how to test your coin optics, but first, answer this question: when you open and close the door( actually lift up and push down the latch to the bottom position) does the display go blank for a few seconds and then the 21 reappears? If you answered YES, then do the following:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |